ITO Conductive Glass · Customer FAQ Are Custom ITO Glass Samples Free, and Is There an MOQ? Samples are paid. Prototype costs, tooling and minimum order quantities depend on the approved design and processing scope and are confirmed in the quotation. Do not assume one quantity rule applies to every ITO configuration. What to Check or Provide ...

ITO Conductive Glass · Customer FAQ Which Inspection Reports Should I Request for ITO Glass? Request the evidence needed for critical requirements, such as dimensions, resistance maps, terminal or isolation results, spectral transmission and heater tests. Agree on methods, sampling and report format before production. What to Check or Provide ...

ITO Conductive Glass · Customer FAQ Can I Clean My ITO Glass with IPA? No universal approval applies. Check compatibility with all exposed coatings, contacts, adhesives and printed features. Use a cleaning method approved for the supplied configuration and intended next process. What to Check or Provide Identify exposed co...

ITO Conductive Glass · Customer FAQ Does Medical-Grade ITO Glass Mean My Device Is Approved? No. Define the component function, exposure, cleaning and required documentation. The phrase alone does not establish sterility, biocompatibility or approval of a finished device. What to Check or Provide Describe the component fun...

ITO Conductive Glass · Customer FAQ Can I Combine ITO and AR Coatings on One Glass Part? A compatible stack can be reviewed. Specify the optical band, angles and required contacts. Layers above the ITO may block direct electrical access, so exposed pads or masking may be needed. What to Check or Provide Define wavelength b...

ITO Conductive Glass · Customer FAQ Which Files Are Needed for Patterned ITO Glass? Provide dimensioned artwork and a controlled drawing showing the coated face, viewing direction, datums, widths, gaps and alignment requirements. Identify file units and the controlling document to avoid scaling or mirroring errors. What to Check or Provide ...

ITO Conductive Glass · Customer FAQ Are ITO Heater Busbars, Leads and Controllers Included? Only when listed in the agreed supply scope. Identify bare coated glass, pads or busbars, attached leads, sensors and control hardware separately in the RFQ and quotation. What to Check or Provide List glass, busbars, leads, sensors...

ITO Conductive Glass · Customer FAQ Will a 24 V ITO Heater Keep My Window Clear? A 24 V supply alone does not establish anti-fog performance. Resistance, electrode geometry, heat loss and control must be matched to the operating conditions. What to Check or Provide Provide voltage range and available current or power. ...

ITO Conductive Glass · Customer FAQ Why Is My ITO Glass Resistance Different from Its Ω/□ Value? Only under the ideal one-square geometry with the stated contact assumptions and negligible additional resistance. Other shapes, electrode spacing and contacts can produce different terminal resistance. What to Check or Provide ...

ITO Conductive Glass · Customer FAQ Can I Order ITO Glass in a Custom Shape? These configurations can be reviewed against a drawing. Curved surfaces require attention to coating distribution, optical angles and current paths. A flat witness coupon alone does not establish every property of a finished dome. What to Check or Provide ...

ITO Conductive Glass · Customer FAQ What Is ITO Glass Used For? ITO glass provides a transparent conductive surface for electrodes, heaters and optical components. Its suitability depends on the complete specification. What to Check or Provide Describe whether you need an electrode, a heater or an optical window. ...